|
|
Coaxial surge protectors
Coaxial surge protectors with a high surge current capacity, suitable for use at zone interface 0 to 2. They are designed primarily for the RF region. Their low insertion loss and low-capacitance design also make these surge protectors ideal for very high frequency ranges.
|
| |
|
|
|
Multistage Protection Module
Multistage protection module designed for the protection of digital telephone and data circuits against transient over-voltages caused by lightning, induced impulses and other voltage surges.Traditional shunt-connected gas filled arresters by themselves can no longer provide adequate or required protection for sensitive line cards or newer generation digital switching systems.The Protector contains ten line protection circuits on a single PCB.
|
| |
|
|
|
Sensitive Electronics
LPI D2 Series Protectors are designed to protect sensitive electronic circuits and components from damaging surge voltages and currents. Extremely fast response and low clamping voltages make the D2 series particularly suitable for the protection of signal and data lines associated with computer, data communication, instrumentation, broadcasting and industrial control interfaces.
|
| |
|
|
|
Sensitive Electronics
Developed to offer transient over-voltage protection to sensitive strain gauge based load cells and signal conditioners. It is configured to provide voltage clamping across the strain gauge outputs as well as the excitation voltage from the signal conditioner.
|
| |
|
|
|
Sensitive Electronics
The ZV-BNC series is intended to protect Arcnet computer network and CCTV coaxial video signals. Both coarse and fine protection is provided in a shielded,impedance matched,compactin-line enclosure. Protection is providedcore-shield,and shiels-protective ground. The design ensures minimum of capacitance loading thereby ensuring a high oprerating bandwidth while providing effcient clamping against transient voltages.
|
| |
|
|
|
Sensitive Electronics
The LZ_NET series is intended to protect Local Area Network(LAN) from over voltage surges and electrostatic discharges created by switching transients in buliding.LAN system are particulaely prone to such disturbances bacuse of the often long cable lengths involved wich behave like antennas to such atmospheric disturbances. it provides protection to all 8 line in the UTP,and is Cat5 capable.
|
| |
|
|
|
Sensitive Electronics
The LZ_NET 6 series is intended to protect Local Area Network(LAN) from over voltage surges and electrostatic discharges created by switching transients in buliding.LAN system are particulaely prone to such disturbances bacuse of the often long cable lengths involved wich behave like antennas to such atmospheric disturbances. it provides protection to all 8 line in the UTP,STP and is Cat6 capable.
|
| |
|
|
|
Sensitive Electronics
The LZ_NET 19 series is intended to protect Local Area Network(LAN) from over voltage surges and electrostatic discharges created by switching transients in buliding.LAN system are particulaely prone to such disturbances bacuse of the often long cable lengths involved wich behave like antennas to such atmospheric disturbances. The IM-DB15 series has been developed to protect 2 pair data transmission circutis using the RS 422,V.11 and x.12 protocols.
|
| |
|
|
|
Sensitive Electronics
The IM-xDSL series has been developed to protect class IADSL transmission.It can also because to protect ISDN, SDSL and HDSL protocol.
|
| |
|
|
|
Sensitive Electronics
The IM-DB15 series has been developed to protect 2 pair data transmission circutis using the RS 422,V.11 and x.12 protocols.
|
